20kg Cure It Glass Guard Roofing Resin
Glass Guard Roofing Resin has been specially formulated for use on GRP flat roofing systems and is adjusted for cure times in all seasons. GRP (or fibreglass) roofing creates a long-lasting and low maintenance flat roofing solution, whilst being safer and more environmentally friendly to install than some traditional roofing methods.This high-quality resin is backed by a 10-year manufacturer guarantee when used in the correct manner and is suitable for both domestic and commercial applications. Glass Guard roof resin is also fire retardant when used in conjunction with slate granules (Slate granules should be applied to the topcoat at a rate of 0.75kg/m² for fire certification - BS476 Part 3:2004) and is used in conjunction with fibreglass matting.
25kg Cure It GRP Slate Granules
Cure It GRP Fibreglass Roofing Non Slip Slate Granules for addition to the GRP Top Coat when wet to add grip - 25kg Bag.Slate granules are used either for decorative purposes or to make a non-slip walk way.
5L Cure It GRP Concrete Primer
Cure It GRP Fibreglass Roofing G4 Concrete Primer 5kg for use as a substrate primer when bonding GRP to concrete.
C1 Cure It GRP Universal External Corner
C1 universal external corner for use with all A and B trims to form a left or right hand corner.
C3 Cure It GRP External Fillet Corner
C3 external fillet corner is used as a preformed external corner for all D-trims. Avoids mitring in situ.
C3 Cure It GRP Internal Fillet Corner
Cure It GRP C3 Internal / External corner fillet GRP edge trim used as a pre-formed internal / external corner for the D260 fillet trim to avoid the need for mitring in situ.
Cure it 12m2 GRP Accessory Starter Pack.
Cure It GRP Fibreglass Roofing Acetone used for cleaning tools, spillages and as a surface decontaminant.
Cure It GRP Catalyst Safety Dispenser
Cure-It GRP Hardener Safety Dispenser is a great way to measure the exact amount when installing Cure-It GRP flat roof systems. It has a 15ml dispensing flute which ensures accurate measurement and dispensing of Cure-It Hardener.
The Cure-It Aluminium extension pole is made to fit with Cure-It soft rollers and paddle rollers.
Cure It GRP Swivel Sanding Pad
This Cure It Swivel Sanding Pad is used for sanding off large flat GRP roofing areas.
The GRP flat flashing trim is a versatile flat section of GRP that can be used to clad surfaces prior to top coating and can be used where a pitched roof meets the flat roof surface. PU trim adhesive should be applied and the trim held in place with pins prior to matting.
Grey Cure It GRP Trim Adhesive
Used for bonding GRP trims around the perimeter of the roof.
Cure It Brushes for the ultimate finish.
Our Cure-It Complete Rollers have been designed for use in the installation of a GRP waterproofing system to apply Roofing Resin and Topcoat. They are available in both 3 and 9" sizes and can be further extended with Cure-It's extension pole.
MEKP catalyst/hardener for the addition to Cure It Roofing Resin & Topcoat. Hardener can be supplied in different strengths to compensate for seasonal variations in temperature, we stock the complete seasonal range.
MEKP catalyst/hardener for the addition to Cure It Roofing Resin & Topcoat. Hardener can be supplied in different strengths to compensate for seasonal variations in temperature, we stock the complete seasonal range.
Cure-It Paddle Rollers have been designed for use in the installation of a GRP waterproofing system to consolidate the resin and chopped strand matting . They can be further extended with Cure-It's extension pole.225mm, 140mm, and 70mm metal paddle rollers for consolidating the laminate.Removes air from roofing laminate and ensures thorough saturation of reinforcement mat.
Cure-It's Reinforcement Mat is used during the installation of a GRP waterproofing system. The mat is laid down and subsequently covered with Roofing Resin in order to form the laminate component of the system. 450g/m2 thickness is suitable for most roofs.
Resin and topcoat application roller for detail work.Does not break down with exposure to styrene.Available in 9", 6" or 3"
Cure It GRP Fibreglass Roofing Topcoat 20 kg provides the finished colour and surface appearance.
Key Features:Size: 20kgColour: Clear20kg Coverage: 13.5 sqmApplications: Flat roofs, industrial applications, pitched roofs, walkways, balconies, green roofs. steps, complex gulleys / guttersGuarantee: 25 Year Product Guarantee
Cure It GRP Fibreglass Reinforcement Bandage is used as a reinforcement for forming corners and other detailed areas of the roof.Width: 75mmLength: 75mUse: Reinforcement Bandage is used as a reinforcement for forming corners and other detailed areas of the roofGuarantee: 25 Year Product Guarantee