McAlpine 1 1/4" Black Multifit Waste Straight Connector - S28M-BL

Multifit Straight ConnectorSimple to use and provides excellent water tight sealNo glue needed can be tightened by handMultifit Fittings suit most plastic waste pipes, copper pipe and lead pipeManufactured in PolypropyleneSize: 1 1/4"Colour: Black

McAlpine 1 1/4" Black Multifit Waste 90° Bend - MS4-BL

90° Multifit BendSimple to use and provides excellent water tight sealNo glue needed can be tightened by handMultifit Fittings suit most plastic waste pipes, copper pipe and lead pipeManufactured in PolypropyleneSize: 1 1/4"Colour: Black

McAlpine 1 1/4" Anti-Syphon Adjustable P Trap - ASA10V

Anti-syphon valve to eliminate noises1 1/4" BSP swivel connectionAdjustable height inletSuitable for domestic maintenance, repair and new installations75mm water seal1 1/4" multifit compression outlet for plastic, copper and lead pipeManufactured in polypropylene

McAlpine 1 1/4" Space Saving Trap Inlet - SSINLET2

1 1/4" connectionsManufactured in polypropyleneSpace savingAllows full use of cupboard space

McAlpine 1 1/4" Anti-Syphon Straight Through Pedestal Trap - X10V

Suitable for bathroom sinks & basinsAnti-syphon valve to prevent noise & 'gurgling'Cleaning eye for easy maintenance75mm water sealMultifit compression outlet suits all plastic, copper and lead pipeManufactured in polypropylene

McAlpine 1 1/4" Anti-Syphon Telescopic Adjustable Bottle Trap - A10AV

Suitable for bathroom sinks & basinsAnti-syphon valve to prevent noise & 'gurgling'Adjustable 'Telescopic' inlet75mm water sealMultifit compression outlet suits all plastic, copper and lead pipeManufactured in polypropylene

McAlpine 1 1/4" Multifit Waste Pipe Blank End - S23U

Waste Pipe Blank CapSimple to use and provides excellent water tight sealNo glue needed can be tightened by handMultifit Fittings suit most plastic waste pipes, copper pipe and lead pipeManufactured in PolypropyleneSize: 1 1/4"Colour: White

McAlpine 1 1/4" Wash Hand Basin Space Saver Waterless Trap - WHB-1

Wash hand basin space-saver. 1 1/4" BSP female inlet nut with 1 1/4" universal compression outlet.Special design allowing full use of storage space below the basin within the cabinet or furniture.The internal membrane opens under water pressure to allow discharge to flow freely and then closes to form a seal to prevent odour.The valve can be easily cleaned without having to disconnect the discharge pipework. Simply remove the split pin at the front of the valve, take out the plug and membrane and clean in hot soapy water. Put back together and relocate the split pin.The WHB-1 has no water seal, so can never dry out through evaporation or lack of use, as the membrane seal remains closed.WHB-1 overall height 62mm.

McAlpine 1 1/4" Shallow Bottle Trap - E10

Excellent to use with basins where there is limited space available.50mm Water Seal.1 1/4" Multifit Compression Outlet suits all plastic, copper and lead pipe.Manufactured in polypropylene.

McAlpine 1 1/4" Multifit Waste Straight Connector - S28M

Multifit Straight ConnectorSimple to use and provides excellent water tight sealNo glue needed can be tightened by handMultifit Fittings suit most plastic waste pipes, copper pipe and lead pipeManufactured in PolypropyleneSize: 1 1/4"Colour: White

McAlpine 1 1/4" Multifit Waste 90° Bend - MS4

90° Multifit BendSimple to use and provides excellent water tight sealNo glue needed can be tightened by handMultifit Fittings suit most plastic waste pipes, copper pipe and lead pipeManufactured in PolypropyleneSize: 1 1/4"Colour: Black

McAlpine 1 1/4" Multifit Waste Swept Tee - V8M

Multifit Swept TeeSimple to use and provides excellent water tight sealNo glue needed can be tightened by handMultifit Fittings suit most plastic waste pipes, copper pipe and lead pipeManufactured in PolypropyleneSize: 1 1/4"Colour: White

McAlpine Mechanical Soil Pipe Boss Connector to 1 1/4" Waste - BOSSCONN110-BL

Simple and easy to install supplied with fixing toolSuits 4"/110mm soil pipeUniversal connection for 1 1/4 pushfit or solvent weld waste pipeSuitable for waste water and condensate dischargeSimple dry fixing mechanical connectionSuits 57mm hole saw size

McAlpine 1 1/4" Bath Trap with 19mm Seal - P10

Ideal for older cast iron bathes with smaller waste plug holes19mm water sealMultifit compression outlet suits all plastic, copper and lead pipeSuitable for use with most standard bath wastesManufactured in polypropylene