Talon 32mm MDPE Hinged Pipe Clips Blue

Size: 31.8 - 35mmColour: BlueColour match for MDPEUK ManufacturedSuitable for all domestic pipework installationsSuitable for use both internally and externallyPipe clips will not discolourCan be linked together with the dovetailsNot impacted by changes in temperaturePreferred spacing between clips on a pipe run 500mm

32mm x 25m Coil Blue MDPE Water Pipe

FloPlast 32mm MDPE Pipe Liner

 

FloPlast 32mm x 25mm x 32mm MDPE Pipe Reducing Tee

The Floplast range of MDPE fittings are suitable for use above and below ground for mains cold water supplies. The compression fittings are WRAS approved and manufactured in accordance with the requirements of BS EN 12201 - 3. The fittings are manufactured from a high quality Polyethylene and suitable for pressures up to 16 bar. Simple to use a liner is placed into the pipe which is then pushed into the fitting as far as it can go. A simple few turns of the nut creates your compression joint with the grab ring taking hold. Suitable lubricant is recommended before inserting the pipe.

FloPlast 32mm MDPE Pipe Stop End

 

FloPlast 32mm MDPE Pipe Stopcock

FloPlast 32mm MDPE Pipe Tee

 

FloPlast 32mm x 25mm Reduced MDPE Pipe Coupling

 

FloPlast 32mm Straight MDPE Pipe Coupling

FloPlast 32mm x 1" BSP MDPE Pipe Female Adapter

Floplast 32mm x 1" BSP MDPE female adapter for above and below ground mains water.Product Type:MDPE Compression FittingFitting Type:Female Adapter ConnectorSize:32mmMaterial:PolyethyleneMPN:493303

FloPlast 32mm x 1" BSP MDPE Pipe Male Adapter

Floplast 32mm x 1" BSP MDPE male adapter for above and below ground mains water.Product Type:MDPE Compression FittingFitting Type:Male Adapter ConnectorSize:32mmMaterial:PolyethyleneMPN:493302

FloPlast 32mm 90° MDPE Pipe Elbow

 

Plasson Stop Cock Tap Chamber Housing with Lid For 20mm 25mm 32mm Pipe