Product Description

JETCEM is a specially formulated rapid setting cement based patching/repair compound which when mixed with water sets in about 30 minutes.

Benefits

Rapid setting (30 minutes, depending on ambient temperature and conditions).

Easy mixing, just add water.

Fills up to 25mm in one application (for deeper holes in excess of 25mm use Jetcem Premix sand/cement)

Areas for Use

Internal and external repairs to gaps and cracks and walls and floors.

Repairing flags, slabs, stones and bricks.

Patching steps and window sills.

Pointing brick and stone.

Jointing earthenware pipes and drains.

Repairs to ponds and pools.

Setting in W/C’s and sinks.

Leak sealing in concrete based surfaces.

Setting railings and posts.

Surface Preparation

Before applying, ensure surfaces are clean, sound and free from dust, crumbly material or any contaminants, which may affect adhesion.

Application

Thoroughly wet surfaces to improve adhesion.

Always use a clean mixing vessel and add approx. 3 parts by volume powder to one part by volume clean cold water and mix immediately to a smooth, reasonably thick slump free paste. The mixed cement will remain workable for 5-10 minutes only. MIX NO MORE CEMENT THAN CAN BE USED IN 5 MINUTES

Press the cement into the repair with a trowel or filling knife.

Once the product begins to stiffen, throw away the residue. DO NOT ADD FURTHER WATER TO THE MIX. THIS WILL DESTROY STRENGTH.

In warm conditions, cover Jetcem with polythene to assist cure.

Clean tools etc with warm water before Jetcem dries.

Health & Safety

Consult MSDS for full list of hazards.

Storage

Store in cool dry conditions between + 5°C and 25°C. Storage outside these parameters will significantly reduce shelf life.

Shelf Life

12 months in original unopened bag. This will reduce significantly once opened.