EVERBUILD FILL AND SKIM READY MIXED PLASTER SUBSTITUTE EASY USE 5 LTR

FILL AND SKIM is revolutionary new ready mixed plaster substitute, formulated using lightweight polymer spheres, to produce an easy to spread and smooth product which enables all tradesmen and DIY enthusiasts to produce a quality finish, normally only associated with a time served plasterer. FILL AND SKIM dries to a hard but flexible finish and is therefore suitable for wall or ceiling application and will fill holes down to 25mm in one application. FILL AND SKIM is the ideal choice for covering textured paint surfaces and for restoring old pitted/uneven plastered walls/ceilings in just one quick application. FILL AND SKIM is also the ideal choice for electricians, plumber, joiners and general builders as a one coat patching plaster for small repair jobs, e.g. over recessed cable trunking and around holes in walls where piping/sockets have been installed. Once, dry, FILL AND SKIM will not shrink, sag or crack and is ready to paint or paper 24 hours after application. FILL AND SKIM finishes smooth and requires little or no sanding. FILL AND SKIM can be used for internal repairs over plaster, wood, brick, stone and rendering.

For covering textured paint surfaces and for restoring old pitted/uneven plastered walls/ceilings in just one quick application.

For internal repairs over plaster, wood, brick, stone and rendering.

The ideal choice for electricians, plumbers, joiners and general builders as a one coat patching plaster for small repair jobs, e.g. over recessed cable trunking and around holes in walls where piping/sockets have been installed.

Fills holes down to 25mm in one application

Ready mixed & easy to apply patching plaster