Product Description

EVERBUILD TWO PART WOOD FILLER is an all-purpose two component polyester wood filler that provides a tough long lasting repair to all woods even in the most demanding situations. Once mixed, the filler sets rock hard to a shatterproof finish in 30 minutes (at any depth) and can be stained painted, varnished or dyed, even with microporous stains. The filler has exceptional strength and flexibility and may be drilled, nailed, planed or carved once dry. The system is totally waterproof and hence is suitable for exterior as well as interior applications.

Benefits

2-Part system – durable, long lasting and shatterproof.

Can be stained, painted, varnished or dyed.

Chemical cure product – sets in 30 minutes to any depth.

Sandable in 30 minutes.

Can be drilled, nailed, planed and carved when dry.

Flexes with the natural movement of the wood.

Areas For Use

Repairing wood damaged by wet rot (in conjunction with EVERBUILD WET ROT WOOD HARDENER) in both interior and exterior applications.

General wood filling in windowsills and frames, doors and door frames, banisters, MDF, laminates etc.

Repair of corner pieces in furniture.

Repair of wooden constructions, marine applications etc.

Repairing chips and damage in parquet and laminate floors.

Surface Preparation

NOTE: If you intend to overstain the wood once filled ALWAYS CHOOSE THE COLOUR OF FILLER THAT NEAREST MATCHES THE WOOD YOU ARE FILLING, NOT THE STAIN YOU INTEND TO USE.

As the filler may absorb some stains at different rates to the surrounding timber, always test a small area first.

Before applying, ensure surfaces are clean, dry, sound and free from dust or any contaminants that may affect adhesion. Lightly sanding the area will improve adhesion. For areas damaged by wet rot, remove as much rotten wood as possible and harden the remaining area with EVERBUILD WET ROT WOOD HARDENER which will give a solid base for filling.

Application

Mix a golf ball volume of filler (approx 38mm diameter) and a 38mm strip of hardener into a homogeneous paste using the spatula provided. Press firmly into the surface requiring repair, leaving the filler slightly proud of the surface for sanding. Leave to dry for approximately 30 minutes before finishing by sanding/staining et