Transform your garden into a stylish sanctuary with our Pavestone Anthracite Porcelain Setts. These setts offer a versatile solution for enhancing the aesthetic appeal of your outdoor space, whether you’re looking to create elegant borders, fill in between larger paving stones, or design unique patterns and features.

The rich anthracite tone brings a sophisticated and contemporary touch, blending seamlessly with various garden designs. Crafted for both beauty and durability, these porcelain setts are easy to install, ensuring a lasting impact on your garden's appearance. Their sawn edges allow for a neat and uniform finish, while the option of a bullnose edge adds a decorative flair. When installed with Priming Slurry and finished with Flexible Jointing Grout, these tiles promise a cohesive, seamless look, enhancing both form and function. Ideal for those looking to personalise their outdoor space with a touch of elegance, these setts are the perfect choice for modern garden design.

• Size: 200x100mm
• Thickness: 20mm
• Coverage: 1000mm x 160mm per linear metre
• Sawn or bullnose edges for a neat, decorative finish
• Use priming slurry during installation for a strong bond
• Recommended flexible jointing grout for paving joints
• Rectified for precise, seamless tiling
• Ideal for creating borders or unique garden patterns
• Durable and easy to install for lasting outdoor charm

Porcelain notice:

Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences. It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles.

Laying instructions:

When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering.

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.