Discover the exquisite Contract 20 porcelain paving range, featuring vitrified tiles with a high-quality capped surface finish. Designed for versatility and durability, these tiles are perfect for enhancing the elegance of garden patios, balconies, flat roofs, and terraces.

With a standard thickness of 20mm, Contract 20 balances style and practicality, offering a more cost-effective solution than full-bodied porcelain tiles without compromising on performance. The tiles boast a remarkable resistance to surface abrasion, ensuring that they maintain their pristine condition over time. Contract 20 tiles are crafted to withstand the challenges of any weather, from the harshness of frost to the heat of summer, retaining their beauty and integrity season after season. With their slip-resistant R11 rated surface, these tiles offer added safety, making them ideal for various outdoor settings. Available in the sought-after size of 600x600mm, they seamlessly fit into both indoor and outdoor spaces, providing a harmonious design flow. Choose from a captivating selection of designs and finishes to complement any environment, whilst enjoying a stylish yet budget-friendly paving solution. Remember to order extra to allow for wastage, ensuring you have enough tiles for your project.

• Size: 600x600mm
• Thickness: 20mm
• Suitable for gardens, balconies, roofs, and terraces
• Can be laid with mortar or supports
• Slip resistant surface with R11 rating
• Resistant to rain, frost, and heat
• Available in various designs and finishes
• Colour: Golden Stone

Porcelain notice:

Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences. It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles.

Laying instructions:

When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering.

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.