Transform your outdoor space with the elegance of natural stone using our beautifully crafted tiles, which combine style and safety seamlessly. With an impressive R11 anti-slip rating, these tiles are designed to prevent slips without foregoing aesthetics.

Measuring 900mm x 600mm with a 16mm thickness, they are lightweight and easy to handle, facilitating hassle-free installation. Their eco-conscious design contributes to a 20% reduction in costs, CO emissions, and energy consumption, making them an ideal choice for the environmentally-minded homeowner. Our tiles offer more than just visual appeal with their textured stone effect finish and square edge profile. They are engineered to maintain their vibrant colour while resisting the effects of seasonal weather changes, frost, and exposure to chemicals. This resilience ensures that your outdoor areas remain as stunning and safe as the day they were installed. Please be aware that each batch of porcelain paving is unique, and slight variations in colour and texture may occur. To achieve a consistent overall tone, mix tiles from different packs during installation.

• Dimensions: 900mm x 600mm; Thickness: 16mm
• Ideal for outdoor paving and garden areas
• Eco-friendly: 20% less CO emissions
• R11 Anti-slip rating ensures safety
• Resistant to frost and seasonal changes
• Chemical resistant for easy maintenance
• Maintains vibrant colour without fading
• Textured stone effect with square edge finish

Porcelain notice:

Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences. It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles.

Laying instructions:

When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering.

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.