Transform your outdoor space with this stylish and durable paving option, perfect for steps and raised patios. Designed to add an elegant touch to any setting, this budget-friendly choice is available in three sizes and a range of popular colours to suit your personal style.

Its hard-wearing and slip-resistant surface is ideal for ensuring safety and longevity, even in damp and wet conditions. Crafted with precision, this paving solution boasts resistance to harsh weather, acid and alkali chemicals, as well as moss and algae. You can trust its vibrant appearance to remain intact over time, as it suffers no colour fading. The rectified edges ensure minimal dimensional variation within each batch, providing a consistent and flawless finish. For optimal results, remember to mix tiles from different packs to achieve the desired overall tone without any colour discrepancies.

• Dimensions: 900 x 600 x 20mm
• Coverage: 1.0m2 per 1.9 tiles, 21.6m2 per 40 tiles
• R11 Anti-slip finish for safety in wet conditions
• Resistant to weather, chemicals, moss, and algae
• No colour fading for lasting aesthetics
• Rectified for minimal dimensional variation
• Suitable for outdoor applications like patios and steps

Porcelain notice:

Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences. It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles.

Laying instructions:

When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering.

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.