The perfect solution for creating a seamless transition from your indoor living spaces to your outdoor terrace or patio. Measuring 800 x 400 x 20mm, this stone-effect porcelain tile offers a natural tumbled stone feel with its feathered edges.

One of the standout features of this paving is its non-porous nature. The vitrified tiles are not only easy to clean, but they are also resistant to frost damage and staining. Additionally, they offer slip-resistant characteristics, making them a safe choice for your patio. No need to worry about extreme weather conditions either, as these tiles are weather-proof, withstanding heat, frost, and rain, which are common causes of damage to standard paving.

Unlike concrete and natural stone, this porcelain paving is not affected by sunlight, meaning it will not fade or weather over time. And if you're someone who appreciates the beauty of hand-cut natural stone paving, you'll love that Antico has fettled edges, replicating that same authentic feel.

The Antico porcelain paving range was inspired by traditional hand-cut natural stone, and its bold stone colours and textures are almost indistinguishable from the real thing.

• Indoor Outdoor Living
• Low Maintenance
• Non-porous
• Slip-resistant
• Weather-proof
• Keeps Its Colour

Coverage:

• Pack of 54 - 17.28m2
• Pack of 33- 10.56m2
• Pack of 16 - 5.12m2
  
  

Installation Advice:

Porcelain patio paving tiles are rectified to give a calibrated dimensional accuracy; allowing for closer jointing and creating the appearance of one large uninterrupted, seamless surface of stone flooring.

A rectified floor tile is one whose edges are perfectly vertical with respect to it's surface. This is a result of precise machining of a regular unrectified tile, so that each of the four sides will be at a 90 degree angle to the top and bottom faces of the tile.

Lay them on an MOT Type 1 or GSB aggregate sub-base with a geo-textile covering, using a 5:1 sharp sand : cement ratio for a 40mm wet mortar bed. Cut tiles with a 'Diamond Porcelain Cutting Blade' using water dust suppression on a hand tool or table saw. Apply a Priming Slurry to the underside of each tile before laying. Aim for a 5mm jocelain is manufactured in batches and the colour and texture can vary from batch to batch. It is therefore essential to lay the paving by mixing the tiles from different packs. This ensures that the overall desired hue is achieved and evens out any slight colour discrepancies. Laying your patio one pallet at a time can lead to slight but visible colour banding.

Keep note of the 'batch code' on the packaging (usually a number followed by a letter or a six-digit number) in case you need more porcelain for future extensions or completion of your paved area.